Kenworth Added to Expanding Meritor Driveline Recall

Kenworth joins growing recall over Meritor drivelines

Paccar is recalling 982 Kenworth trucks equipped with certain Cummins-supplied Meritor drivelines after a manufacturing issue was found in the slip yoke assembly.

The affected trucks may be missing a snap ring that helps retain the bearing cup in the driveline. If the bearing cup separates, the driveline could come apart, potentially causing the truck to lose power. A separated component could also create a roadway hazard for nearby motorists.

The recall follows a related action by Daimler Truck North America involving Freightliner and Western Star trucks equipped with the same type of driveline. Taken together, the recalls cover several thousand vehicles from the two manufacturers.

Paccar estimates that fewer than 1% of the recalled Kenworth trucks contain the defect. In a filing, the company estimated that approximately 0.3% of the total recall population, or fewer than three trucks, may actually be affected.

No warranty claims or injury reports related to the Kenworth drivelines have been received by Paccar. The company has received one field report, however.

Models and components involved

The recall covers certain 2027-model Kenworth T280, T380, T680, T880 and W990 trucks built in August and September 2026.

The affected vehicles are equipped with specific Cummins-supplied RPL10, RPL14, RPL20, RPL25, RPL35 and 176MXL series driveshafts. The recall population is limited to vehicles containing those driveline configurations and production combinations.

Drivers may notice unusual driveline vibration or noise if a truck is experiencing a related problem. Those symptoms can have many possible causes, but in a recalled vehicle they may indicate that the driveline requires inspection.

How the repair will be handled

Kenworth dealers will inspect the driveline to determine whether the snap ring is installed correctly. If the ring is missing, the driveline will be replaced at no cost to the owner.

Paccar has confirmed that the parts needed for the repair are available through authorized service centers. The company said owner notification letters are expected to be mailed Jan. 10, 2027.

The remedy is intended to prevent the bearing cup from separating from the slip yoke assembly. A driveline separation can interrupt power transfer from the transmission to the drive axle, leaving the truck unable to move under its own power. It can also cause parts to fall onto the roadway.

Broader recall activity

The Kenworth recall is part of a broader response to the same potential defect in Cummins Meritor drivelines. Daimler Truck North America previously recalled Freightliner and Western Star vehicles that may also be missing the retaining snap ring.

For those trucks, inspections and repairs are being handled through Cummins-authorized service facilities. Kenworth owners will receive service through the Kenworth dealer network.

The driveline recall is separate from another Paccar recall involving a possible oil contamination issue in the power distribution center on certain 2027 Kenworth and Peterbilt trucks. That separate defect may affect engine power, antilock brakes, exterior lighting, wipers or the defroster. It involves different components and should not be confused with the Meritor driveline campaign.

For fleets operating the recalled Kenworth models, the driveline issue is limited in scope, but the potential consequence of a separation makes the repair important. Any unusual vibration or noise from the driveline should be documented and evaluated during the recall process, particularly on trucks built during the affected production period.

Similar Posts

Leave a Reply